USED HFO Based Generators
Used Heavy Fuel Oil (HFO) Generator Systems
High-Capacity Power for Large-Scale Energy Demand
Euro Tech Engineering & Services supplies used Heavy Fuel Oil (HFO)-based power generation systems engineered for continuous base-load operation in large-scale industrial and utility applications.
These systems are refurbished, performance-tested, and designed to deliver high-capacity, fuel-efficient, and reliable power generation under demanding operating conditions.
Available Engine & Generator Brands
HFO Engine OEMs:
Wärtsilä (Medium-Speed Engines – W Series)
MAN Energy Solutions (MAN B&W Engines)
MWM (Deutz Power Systems)
Hyundai Heavy Industries
Other European & Industrial Power Brands
Power Rating & Electrical Parameters
Power Range: 3 MW – 50 MW+ (per unit / plant basis)
Voltage: 400V / 6.6kV / 11kV / 132kV (LV / MV / HV systems)
Frequency: 50 Hz
Power Factor: 0.8 – 1.0 (adjustable)
Phase: Three Phase
Engine Technical Specifications
Type: 4-Stroke / 2-Stroke Medium-Speed HFO Engine
Fuel Type: Heavy Fuel Oil (HFO), Furnace Oil (FO)
Speed Range: 300 – 1000 RPM (medium-speed engines)
Aspiration: Turbocharged & Aftercooled
Fuel Injection: High-Pressure Injection System
Governing: Electronic Speed Governing System
Fuel System & Treatment
HFO systems require integrated fuel handling and conditioning:
Fuel Heating System (Preheating for viscosity control)
Fuel Separators / Centrifuges
Fuel Booster Module
Filtration & Viscosity Control Units
Storage & Day Tank System
Alternator Specifications
Type: Brushless Synchronous Alternator
Insulation Class: Class H
Protection: IP23 / IP44 / IP54
Voltage Regulation: ±0.5% to ±1% (AVR controlled)
Grid Synchronization Capability
Control & Automation System
PLC / DCS-Based Plant Control System
Synchronization & Load Sharing System
SCADA Monitoring & Remote Operation
Protection Systems:
Overload & Short Circuit Protection
Over/Under Voltage & Frequency
High Exhaust Temperature
Low Lube Oil Pressure
Engine Overspeed Protection
Mechanical & Plant Configuration
Skid-mounted or complete plant installation
Exhaust gas system with silencers
Cooling system (Radiator / Central Cooling System)
Lubrication system with filtration
Anti-vibration mounting system
Testing & Performance Verification
Full load testing (up to 100% capacity)
Heat rate & fuel consumption analysis
Voltage & frequency stability testing
Continuous endurance run
Emission & exhaust monitoring
Operating Characteristics
Designed for continuous base-load operation
High plant availability (>90%)
Electrical efficiency: 40% – 50%+ (depending on model)
Suitable for 24/7 industrial operation
Long service intervals with proper maintenance
Applications
Independent Power Producers (IPP)
Cement, Steel & Heavy Industries
Large Manufacturing Facilities
Utility Power Generation Plants
Remote & Off-Grid Power Projects
Key Technical Advantages
High-capacity continuous power generation
Lower fuel cost for large-scale operations
Robust and heavy-duty industrial design
Long operational life and durability
Suitable for harsh operating environments
Scalable for multi-MW power plants
Technical Summary
Used HFO generator systems are heavy-duty, high-capacity power generation solutions designed for continuous industrial and utility-scale operations, offering fuel-efficient performance, long operational life, and reliable base-load power generation
Supply of Power House Package
WÄRTSILÄ Finland — Integrated Industrial Power Generation Solution
We offer a complete Power House Solution consisting of high-performance WÄRTSILÄ Finland used generator sets, along with fully integrated auxiliary systems, electrical infrastructure, and complete balance of plant equipment.
This solution is designed for reliable, continuous, and industrial-scale power generation, suitable for long-term base load operations with proven performance and efficiency.
Total Capacity
Sets
Origin
Power Generation System
Technical Details — Generator Sets
Alternator / Generator
| Make | Hyundai |
| Model | HFJA 802-14E |
| Year of Manufacturing | 2001 |
| Rating | 3,500 KVA |
| RPM | 720 |
| Frequency | 60 Hz |
| Condition | Excellent Running Condition |
Prime Mover — WÄRTSILÄ Engine
| Make | WÄRTSILÄ (Finland) |
| Model | 8R32LND |
| Year of Manufacturing | 2001 |
| Rating | 2,960 kW |
| RPM | 720 |
| Running Hours |
5,959 hrs
6,313 hrs
5,203 hrs
|
| Condition | Excellent Running Condition |
Associated Auxiliaries & Systems
Complete Supporting Systems for Safe & Efficient Power Plant Operation
-
Generator Control & Synchronization System
-
Electrical Power Distribution Panels
-
Cooling & Heat Exchange Systems
-
Lubrication & Fuel Handling Systems
-
Air Compression System
-
Protection, Monitoring & Control Systems
-
Interconnecting Power Cables & Accessories
-
Operational Spare Parts (as applicable)
Detailed Scope of Supply
Complete WÄRTSILÄ 8R32 LN Power Plant Package
We provide a fully integrated industrial power generation package based on WÄRTSILÄ 8R32 LN Diesel/Gas Gensets, including all essential electrical systems, auxiliaries, balance of plant equipment, critical spare parts, and complete technical documentation for long-term reliable operation.
Equipment List
| S.No | Description | Qty / Details |
|---|---|---|
| 01 | WÄRTSILÄ 8R32 LN Diesel/Gas Gensets | 03 Nos |
| 02 | Generator Power Panels with Synchronizing System | 05 Nos |
| 03 | Auxiliary Panels | 02 Nos |
| 04 | Power Cables – Generator to Panel | 03 Sets |
| 05 | Mixed Spare Parts including One (01) Spare Crank Shaft | As per attached pictures |
| 06 | Main L.O Pump, Complete Unit | 02 Nos |
| 07 | Central Heat Exchanger, Plate Type – Alfa Laval | 02 Nos |
| 08 | H.F.O Purifier – FOPX 616 | 05 Nos |
| 09 | Lube Oil Purifiers with Control Panels – LOPX 705 | 04 Nos |
| 10 | Main Air Compressor WP310L, Air Cooled, 360 m³/hr × 30 Bar – J.P Sauer & Sohn | 04 Nos |
| 11 | Engine & Generator Manuals | Complete Set |
System Highlights
Complete Power Generation & Synchronization System
Fully Integrated Auxiliary & Fuel Treatment Systems
Industrial Grade Cooling & Lubrication Support
Critical Spare Parts Included for Operational Reliability
Designed for Continuous Base Load Operation
Turnkey Power Solution — Ideal Applications
Independent Power Plants (IPP)
Industrial & Manufacturing Facilities
Cement & Textile Industries
Oil & Gas Sector Applications
Large Scale Utility & Infrastructure Projects
Turnkey Power Solution
Complete 10,500 KVA WÄRTSILÄ Finland Power House Package
A fully integrated industrial power generation solution — engineered for continuous base load operations with all auxiliaries, fuel treatment systems, electrical infrastructure, critical spare parts, and complete technical documentation included for long-term reliable operation.
100 MW HFO Power Plant
Complete Independent Power Plant (IPP) Solution
A complete 100 MW Heavy Fuel Oil (HFO) based Independent Power Plant (IPP) is available for sale. The plant consists of high-capacity CAT HFO generating units with complete balance of plant systems, electrical infrastructure, auxiliary equipment, fuel handling systems, control systems, and operational support equipment.
The power plant is designed for reliable continuous base load operations and industrial utility-scale power generation. The plant has been maintained according to OEM guidelines with scheduled preventive and overhaul maintenance performed throughout operational life.
Offered By
Euro Tech Engineering & Services
A Division of Euro Tech Group of Companies
Company Overview
Euro Tech Engineering & Services
Multinational Engineering, EPC & Power Generation Organization
Independent Power Plants (IPP)
Heavy Fuel Oil (HFO) Power Plants
Gas Power Plants
Diesel Power Stations
Combined Cycle Power Plants
Renewable Energy & BESS
EPC & Industrial Infrastructure
HT/LT Electrical Systems
Operation & Maintenance (O&M)
Pakistan
United Kingdom
Australia
100 MW HFO Power Plant
International Standard IPP Facility
Facility Design
Continuous utility-grade operation
Industrial base-load power generation
High reliability and synchronized operation
International engineering compliance
Plant Includes
Power generation systems
Electrical infrastructure
Fuel handling systems
Automation & synchronization systems
Auxiliary equipment
Protection & safety systems
Operational support facilities
| Description | Details |
|---|---|
| Plant Type | HFO Based Independent Power Plant |
| Total Capacity | 100 MW |
| Fuel Type | Heavy Fuel Oil (HFO) / Diesel |
| Operation Type | Continuous Base Load |
| Frequency | 50 Hz |
| Voltage | 11 kV |
| Synchronization | Automatic |
| Power Distribution | HT Industrial Network |
| Plant Category | Utility & Industrial Grade |
| Plant Configuration | Multi DG Synchronized System |
International Compliance & Certifications
Adhering to Global Engineering & Safety Standards
International Engineering Standards
ISO Standards
IEC Standards
IEEE Standards
NFPA Standards
OEM Engineering Guidelines
International Power Generation Practices
Industrial Safety Regulations
Quality Management Compliance
ISO 9001 – Quality Management System
Quality Assurance Procedures
Industrial Inspection Standards
Preventive Maintenance Standards
OEM Maintenance Compliance
Equipment Reliability Programs
Health, Safety & Environment (HSE)
Occupational Health & Safety (OH&S) Compliance
Permit to Work (PTW) System
Fire Protection & Fire Fighting Systems
Emergency Shutdown Systems
Industrial Risk Assessment Procedures
Environmental Protection Compliance
Hazard Management Procedures
PPE & Safety Training Programs
Electrical & Power System Compliance
IEC Electrical Standards
Generator Protection Standards
Synchronization Protection Systems
HT/LT Distribution Compliance
Earthing & Lightning Protection Standards
Power Quality Monitoring
Grid Synchronization Compliance
Industrial Electrical Safety Standards
Environmental & Emission Compliance
Controlled Emission Operation
Industrial Noise Control Systems
Fuel Treatment & Handling Systems
Environmental Monitoring Procedures
Waste Oil Handling Procedures
Pollution Prevention Standards
DG Set Technical Details
Engine, Alternator, Fuel & Lubrication Specifications
Engine Specifications
| Engine Make | CAT 16CM32C |
| Year of Manufacture | 2004 |
| Nominal Output | 7,680 kW |
| Engine Type | Four-Stroke Medium Speed |
| Nominal Speed | 750 RPM |
| Rotation | Counter Clockwise |
| Turbocharger | ABB TPL 65-A30 |
| Fuel Type | HFO / Diesel |
| Lubrication Oil | SAE 40 |
| Cooling Type | Heavy Duty Industrial Cooling |
Alternator Details
| Voltage | 11,000 V |
| Output | 9,127 kVA |
| Frequency | 50 Hz |
| Duty Type | Continuous Operation |
| Synchronization | Automatic |
| Insulation | Industrial Grade |
Fuel Specifications
| Fuel Grade | HFO (180 cSt) |
| Density @15°C | 0.96 |
| Viscosity @50°C | 180 cSt |
| Calorific Value | 41.00 MJ/kg |
| Secondary Fuel | Diesel |
Lubrication System
| Lubricants Used | Mobil Gard M440 / Caltex Taro 40XL |
| Oil Consumption | 4.6 kg/h ±50% |
| Lubrication Type | Automatic Circulation System |
| Filtration System | Heavy Duty Industrial Filters |
Performance Data
| Average Running Hours | 93,632 Hours |
| Last Updated | 29 June 2022 |
| Last Major Maintenance | 1 March 2020 |
| Last Maintenance Reading | 87,042 Hours |
| Major Overhaul Interval | 15,000 Hours |
| Specific Fuel Consumption | 201.90 g/kWh |
| Specific Lube Consumption | 0.85 g/kWh |
Maintenance & Reliability Status
Scheduled OEM Maintenance & Overhaul Programs
Maintenance Scope Includes
Complete Preventive Maintenance
Major Overhauls
Top Overhauls
Turbocharger Servicing
Fuel System Calibration
Injector Testing
Alternator Inspection
Relay Testing & Calibration
Protection System Verification
Synchronization System Testing
Complete Balance of Plant (BOP)
Fully Integrated Plant Systems & Infrastructure
Fuel Handling System
HFO Storage Tanks
Day Tanks
Fuel Transfer Pumps
Fuel Booster Modules
Fuel Heating System
Fuel Purifiers
Filtration Systems
Cooling System
Central Cooling System
Heat Exchangers
Cooling Pumps
Expansion Tanks
Water Treatment System
Electrical Infrastructure
Generator Synchronizing Panels
HT Switchgear
Transformers
Protection Relays
Busbar Systems
Power Cables
Earthing System
Automation & Control
PLC Control System
SCADA Monitoring
Load Sharing System
Automatic Synchronization
Alarm & Protection System
Emergency Shutdown System
Mechanical & Utility Systems
Industrial Exhaust Systems
Silencers
Ventilation System
Compressed Air System
Fire Fighting Network
Drainage & Utility Systems
Plant Advantages
International Standard IPP Facility
Reliable CAT Medium Speed Engines
Dual Fuel Capability (HFO/Diesel)
Low Operating Cost on HFO
Continuous Base Load Operation
Complete Synchronized Power System
Well Maintained Plant
Utility Grade Power Generation
Industrial Heavy-Duty Equipment
Suitable for Relocation or Continued Operation
Applications
Utility Power Generation
Independent Power Producer (IPP)
National Grid Support
Industrial Captive Power
Cement Plants
Steel Mills
Textile Industries
Oil & Gas Facilities
Mining Operations
Infrastructure Projects
Available Documentation
Available for Serious Buyers
Technical Datasheets
OEM Manuals
Maintenance History
Inspection Reports
SLD Drawings
Layout Drawings
Spare Parts Lists
Load Test Reports
Operational Reports
Electrical Diagrams
Engineering & Project Support
Complete Engineering Services Available
EPC Services
Dismantling & Relocation
Transportation Support
Installation & Commissioning
Grid Synchronization
Performance Testing
O&M Contracts
Spare Parts Supply
Contact Information
Euro Tech Engineering & Services
A Division of Euro Tech Group of Companies
